Details
Genny4 Transmitter Specification
1. Product Summary
| 1.1 Product Overview: | The Genny signal transmitter has been designed to complement Radiodetection’s C.A.T4 cable avoidance range |
| 1.2 Product Descriptions: | Signal transmitter, Multi-function transmitter, Cable and pipe transmitter |
| 1.3 Intended Use: | Used with C.A.T®4 range of locators for avoiding and tracing buried utilities |
| 1.4 Supplied With: | Tool tray to include direct connection lead, earth stake and neodymium magnet |
2. Performance
| 2.1 Maximum Output Voltage: | 23V RMS into an open circuit |
| 2.2 Maximum Output Current: | 66mA RMS into a short circuit |
| 2.3 Maximum Output Power: | 1 Watt in Direct Connection Mode |
| 2.4 Induction Output: | Magnetic flux density (B) 1.089 µT @ 500mm |
3. Transmit Functions and Operation
Transmits a signal or simultaneous signals to aid location of cables and pipes, including smaller diameter cables such as telecom or CATV.
| 3.1 Operation: | Push button control by pressing appropriate push button. On / Off, speaker volume control and Boost button for selecting standard or Boost output level |
| 3.2 LED Indication: | Indicates Boost output mode selection and battery low warning indicator |
| 3.3 Operating Modes: | Direct Connection Mode: 33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously Transmitter Clamp Mode: 33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously Induction Mode: 33kHz (32768Hz) |
| 3.4 Output Signal Level: | Selectable Standard or Boost Mode. Note: Transmitter will always power up in standard mode |
| 3.5 Audio Output: | Standard and Mute options. Audio output changes to indicate a good connection |
| 3.6 Power Options: | Alkaline or NiMH – requires 4 off D type cells |
| 3.7 Battery Life: | 40 hours continuous in standard mode or 15 hours continuous in Boost mode using Direct Connection method 28 hours continuous in standard mode or 9 hours continuous in Boost mode using Induction method |
4. Physical Characteristics
| 4.1 Construction: | Injected Molded ABS Plastic |
| 4.2 Weight: | 2.75kg (6lbs) with batteries and tool tray fitted |
| 4.3 Dimensions: | 27.5cm (10.8”) x 17cm (6.7”) x 20cm (7.8”) |
| 4.4 Ingress Protection Rating: | IP54 |
| 4.5 Audio Option: | Built-in water-resistant speaker |
| 4.6 Operating Temperature: | -20°C to 50°C / -4°F to 122°F |
| 4.7 Storage Temperature: | -40°C to 70°C / -40°F to 158°F |
| 4.8 External Connection: | XLR type for connection of direct connection lead, transmitter clamp and accessories |
5. Warranty and Maintenance
| 5.1 Manufacturer’s Warranty Duration: | 1 year standard |
| 5.2 Recommended Service Schedule: | Annual, or at the beginning / end of a lease period if earlier |
| 5.3 Storage Recommendation: | Store in a clean and dry environment. Ensure all terminals and connection sockets are clean, free of debris and corrosion and are undamaged. |
| 5.4 Cleaning: | Clean with a soft, moistened cloth. Do not use abrasive materials or chemicals or high pressure jets of water. If using this equipment in foul water systems or other areas where biological hazards may be present, use an appropriate disinfectant. |
6. Certification and Compliance
| 6.1 Standards: | Safety: EN 60950-1:2006+A2:2013, EN 60950-22:2006 EMC: EN 61326-1:2013, EN 300 330-2 (V1.5.1), EN 301 489-3 (V1.6.1), EN 301 489-17 (V2.2.1) |
| 6.2 European Directives: | Radio Equipment 2014/53/EU ROHS Directive: 2011/65/EU Declaration of conformity is available from www.radiodetection.com |
| 6.3 Radio: | FCC, IC |
| 6.4 Environmental: | WEEE compliant, ROHS compliant |
| 6.5 Manufacturing: | ISO 9001:2008 |
7. Compatible Accessories
| 7.1 Genny Clamp: | Available in 2″ (50mm), 4″ (100mm), 5″ (130mm) and 8.5″ (215mm) diameters. Part number: 10/GENNY-CLAMP-XX (XX = 50, 100, 130, 215) |
| 7.2 Extension Rod: | 25″ (630mm) length, non-conductive nylon extension rod. Part number: 10/TX-CLAMP-EXTROD |
| 7.3 Earth Extension Lead: | 33′ (10m) Earth Extension Lead. Part number: 10/TX-EARTHLEAD |
| 7.4 Earth Stake: | Provides an earth return for Genny transmitter. Part number: 10/GENNY-EARTHSTAKE |
| 7.5 Neodymium Magnet: | For attaching direct connect lead to metal pipes etc. Part number: 10/TX-MAGNET |
| 7.6 Direct Connection Lead: | Directly connecting Genny signal to utility. Part number: 10/GENNY-DC-LEAD |
| 7.7 Live Plug Connector (LPC): | Applies Genny signal to mains wiring via mains socket. Part numbers: 10/GENNY-LPC-UK, 10/GENNY-LPC-EUR, 10/GENNY-LPC-ROW |
| 7.8 Live Cable Connector (LCC): | Applies Genny signal to live mains wiring. Part number: 10/GENNY-LCC |